EMBUX is glad to introduce the yocto 1.6.2 test build running on the ICM-3011.
ICM-3011 is a 3.5’’ ARM-based embedded board, powered by NXP (Freescale) i.MX6, provides multi-integrated functions for easy implementation.
Please refer EMBUX website for latest update.
Information
- uboot: 2014.04
- kernel: 3.10.53
- rootfs: Yocto 1.6.2 (Daisy)
Below is the introduction for Yocto 1.6.2 (Daisy) from NXP document:
What is the Yocto Project?
“A Linux Foundation workgroup whose goal is to produce tools and processes that enable the creation of Linux distributions for embedded software independent of architecture”
NXP (Freescale) Yocto Project
- Linux distributed build system
- Replacement for LTIB
- Higher integration with community
- Flexible release targets
ICM-3011 Main Features
▪ All-In-One Fanless SBC
▪ All solid capacitors & 1% precision resistors design
▪ Industrial & jumper-less design
▪ Power on/off test over 100 times before shipment
▪ Support dual LVDS panels
▪ Support dual channel LVDS panel up to 1920X1080 resolution
▪ 3G/Wi-Fi solution available
▪ NXP i.MX6 DualLite 1.0 GHz Cortex-A9
▪ Onboard DDR3 2GB
▪ 4GB eMMC NAND Flash and 8MB NOR Flash
▪ 2 x 18/24-bit LVDS
▪ 1 x HDMI 1920x1080
▪ 1 x 10/100/1000 Mbps Ethernet
▪ 4 x USB 2.0
▪ 4 x RS-232 (8-wire), 2 x RS-232 (4-wire)
▪ Line-In (Header), Line-Out (Phone Jack), Mic-In (Phone Jack)
▪ 2 x CAN
▪ 1 x Standard SD slot, 1 x SDIO slot
▪ 1 x half/full-size mini-PCIe (PCIe & USB signal)
▪ 1 x half/full-size mini-PCIe (USB signal)
▪ 1 x SIM card socket
▪ Wide range power input from 10.8V to 26.4V