EMBUX, the ARM based embedded platform and integration services provider, announces the new ARM-based industrial-grade 3.5” NXP i.MX6 CPU Board, ICM-3011, is a low profile NXP i.MX6 design with a rich variety of I/O functions to fulfill an assortment of space-limited applications. ICM-3011 can apply to many embedded applications such as slim signage boxes, slim panel PCs, vending machines, nursing carts, small POS systems, and automotive infotainment.
Rich I/O Interface for Best Performance
ICM-3011 incorporates ARM® Cortex™-A9 architecture for next-generation industrial and automotive applications, which combines scalable platforms with broad levels of integration and power-efficient processing capabilities particularly suited to multimedia applications. With a power-efficient processing capabilities of leading edge 3D and 2D graphics, as well as high-definition video and a new level of multimedia performance to enable an unbounded next generation user experience. ICM-3011 offers a variety of I/O interfaces including : 2 x 18/24-bit LVDS output, 1 x HDMI, 1 x Gigabit LAN, 4 x USB 2.0, 1 x USB OTG (micro USB type), 4 x RS-232 (8-wire), 2 x RS-232 (4-wire), 2 x RS-485, 2 x CAN-bus interface, 1 x SDIO, 1 x standard SD, 1 x SIM card socket and 2 x half/full mini PCIe.
Thin Design for Flexible Embedded Integration
ICM-3011’s thin design provides a high degree of flexibility and allows the system to be easily integrated into low-profile enclosures for a wide range of applications. The total height of ICM-3011 is only 25mm, which can easily meet compact size-requirements for slim chassis applications. ICM-3011 not only offers enhanced stability but also durability.
Innovative Reliability Design
ICM-3011 is an ARM-based industrial and jump-less design, which develops with all solid capacitors and 1% precision resistors, and all boards are also guaranteed with over 100 times on/off cycling test before factory output to ensure the best quality that EMBUX commits to customer satisfaction.
Tailor-made Operating System
EMBUX offers the precise adaptation to customer requirements. Not only low interdependency among modules allows for easy modification, but also reliable peripheral drivers support various resolution and dimension for LVDS panels, Touch (RTP/CTP), GPIO, CANBus, SDIO, watchdog timer, HDMI, RS-232 and RS-485. Supported operating system including Yocto (1.6.2), Android (5.0.2) and WEC7 - hardware drivers for these are built-in and readily available.
ICM-3011 Main Features
▪ All-In-One Fanless SBC
▪ All solid capacitors & 1% precision resistors design
▪ Industrial & jumper-less design
▪ Power on/off test over 100 times before shipment
▪ Support dual LVDS panels
▪ Support dual channel LVDS panel up to 1920X1080 resolution
▪ 3G/Wi-Fi solution available
▪ NXP i.MX6 DualLite 1.0 GHz Cortex-A9
▪ Onboard DDR3 2GB
▪ 4GB eMMC NAND Flash and 8MB NOR Flash
▪ 2 x 18/24-bit LVDS
▪ 1 x HDMI 1920x1080
▪ 1 x 10/100/1000 Mbps Ethernet
▪ 4 x USB 2.0
▪ 4 x RS-232 (8-wire), 2 x RS-232 (4-wire)
▪ Line-In (Header), Line-Out (Phone Jack), Mic-In (Phone Jack)
▪ 2 x CAN
▪ 1 x Standard SD slot, 1 x SDIO slot
▪ 1 x half/full-size mini-PCIe (PCIe & USB signal)
▪ 1 x half/full-size mini-PCIe (USB signal)
▪ 1 x SIM card socket
▪ Wide range power input from 10.8V to 26.4V
ICM-3011 will be available by Q2 2016, for more information, please visit the website www.embux.com or contact EMBUX directly.